سحر محمد ابراهيم عبد الحميد
مدرس
Preparation, physico-mechanical characteristics and durability of eco-alkali-activated binder from blast-furnace slag, cement kiln-by-pass dust and microsilica ternary system
• 2020
معلومات البحث
المؤلفون
Mohamed Heikal a,⇑
, M.E.A. Zaki b
, Sahar M Ibrahim a
الكلمات المفتاحية
Geopolymer
Aggressive attack
Microscopic characteristics
Conductivity
Durability
Total sulfate
Total chloride
المجلة العلمية
Not Available
الناشر
Not Available
المجلد
Not Available
العدد
Not Available
الصفحات
Not Available
publication.type
International
رابط البحث
Open Link
المواد المرفقة
Not Available
الملخص
The objective of the study is to produce a more durable binder by preparing different mixes from
Blastfurnace-slag (GBFS), By-pass cement dust (CKPD), and/or micro-silica (MS). Conductivity, compressive strength (CS), bulk density (BD), total porosity (TP), combined water (Wn), combined slag, total sulfate (TS) and total chloride (TC) contents used to make the necessary measurements. MS impacts have a
good role in the location and conductivity maximum. Irregular replacement of GBFS with 20-30 mass%
CKPD uncommonly increases CS, BD, combined slag content, whereas decreases the TP. The compressive
strength diminishes with CKPD content up to 40–50 mass%. We do recommend that, 20% CKPD is the
suitable mix composition, giving a lower value of TP and high values of CS, BD, and Wn contents. In
the existence of MS, the resistance of 5% MgSO4 and 5% MgCl2 solutions has modified to decrease the rate
of permeation of SO4
2- and Cl- anion.
Blastfurnace-slag (GBFS), By-pass cement dust (CKPD), and/or micro-silica (MS). Conductivity, compressive strength (CS), bulk density (BD), total porosity (TP), combined water (Wn), combined slag, total sulfate (TS) and total chloride (TC) contents used to make the necessary measurements. MS impacts have a
good role in the location and conductivity maximum. Irregular replacement of GBFS with 20-30 mass%
CKPD uncommonly increases CS, BD, combined slag content, whereas decreases the TP. The compressive
strength diminishes with CKPD content up to 40–50 mass%. We do recommend that, 20% CKPD is the
suitable mix composition, giving a lower value of TP and high values of CS, BD, and Wn contents. In
the existence of MS, the resistance of 5% MgSO4 and 5% MgCl2 solutions has modified to decrease the rate
of permeation of SO4
2- and Cl- anion.