طارق سيد مصطفى
أستاذ
Application of nanosilica in reinforced concrete beams
Structures and Buildings • 2022
معلومات البحث
المؤلفون
Tarek. S. Mustafa, Mohamed O.R. El Hariri, Mohamed S. Khalafalla, and Yasmin Said
الكلمات المفتاحية
beams; girders; concrete; structures; materials technology
المجلة العلمية
Structures and Buildings
الناشر
Proceedings of the Institution of Civil Engineers
المجلد
175
العدد
5
الصفحات
Not Available
publication.type
International
رابط البحث
Open Link
المواد المرفقة
Not Available
الملخص
The partial replacement of cement with nanomaterials such as nanosilica (NS) particles in concrete improves its
strength and other properties. In this study, the effect of NS as a partial replacement of cement for concrete mixes
and concrete beams was examined. The studied response characteristics of reinforced concrete beams included the
compressive strength, failure mechanisms, load-carrying capacity and load–deflection behaviour. The results showed
that compressive strength increased with an increase in NS content up to 2.0% replacement of cement weight. The
rate of increase in compressive strength was no longer significant beyond 2.0% replacement, indeed there was a
slight decrease in compressive strength for NS content of 3.0%. The effect of increased NS content on the flexural
behaviour of beams was also studied. Increased NS content led to increases in the first-cracking and ultimate loads
and reductions in the deflection at cracking and ultimate load levels. No major differences in the structural response
parameters were observed for test beams with zoning of NS in the bottom tension or top compression zones. An
increase in NS content led to a slight increase in the ultimate strain associated with the ultimate load. Good
agreement was found between experimental and theoretical ultimate moments
strength and other properties. In this study, the effect of NS as a partial replacement of cement for concrete mixes
and concrete beams was examined. The studied response characteristics of reinforced concrete beams included the
compressive strength, failure mechanisms, load-carrying capacity and load–deflection behaviour. The results showed
that compressive strength increased with an increase in NS content up to 2.0% replacement of cement weight. The
rate of increase in compressive strength was no longer significant beyond 2.0% replacement, indeed there was a
slight decrease in compressive strength for NS content of 3.0%. The effect of increased NS content on the flexural
behaviour of beams was also studied. Increased NS content led to increases in the first-cracking and ultimate loads
and reductions in the deflection at cracking and ultimate load levels. No major differences in the structural response
parameters were observed for test beams with zoning of NS in the bottom tension or top compression zones. An
increase in NS content led to a slight increase in the ultimate strain associated with the ultimate load. Good
agreement was found between experimental and theoretical ultimate moments
