Publications

Mohamed Salama

Lecturer Emeritus

Faculty of Engineering, Shoubra Civil Engineering

REPAIR OF DISTRESSED RC BEAMS USING GLASS FIBER REINFORCED POLYESTER CONTAINING DIFFERENT POWDERS

2013

Full Paper Abstract

A Crack Originating From A Notch On A Rim Of A Semi-Infinite Plate Of Dissimilar Materials Under Transverse Bending, Proceedings of Al-Azhar Engineering Seventh International Conference, Cairo, C13-02, Egypt.

2003

Punching Of A Rigid Inclusion On The Rim Of Infinite Plate Of Dissimilar Materials Under My, Proceedings of Al-Azhar Engineering Seventh International Conference, Cairo, C13-01, Egypt.

2003

A Comparison Study Between Short Reinforced Concrete Circular Columns and Concrete-Filled Steel Tubes, Proceedings of the Third International Conference on Civil and Architecture Engineering ICCAE, Military Technical College, Cairo, CS1, pp.1-10, Egypt .

1999

Stress Concentration Factors at an Elliptical Hole on the Interface Between Bonded Dissimilar Half-Planes under Bending Moment, Transaction ASME, Journal of Applied Mechanics. Vol. 63, pp.7-14, USA.

1996

Full Paper Abstract

Analysis of Interface Cracks Between Bonded Bi-Material Strips for Thermal Loading, The First International Symposium on Thermal Stresses and Related Topic, ACT CITY Hamamatsu, Japan

1995

Thin Plate Bending Problem of Dissimilar Strips with Two Bond Lines, Archive of Applied Mechanics, Archive of Applied Mechanics, Springer Verlag, Vol. 66, pp. 20-23, GERMANY.

1995

Full Paper Abstract

Thin Plate Bending of Bimaterial Half-Planes with an Elliptical Hole on the Interface Under Bending Moment, International Journal of Fracture, Vol. 74, pp. 199-218, USA.

1995

Full Paper Abstract

Thermal Stress Analysis of Thin Plate Bending of Partially Bonded Dissimilar Strips, Proceedings of the Fourth International Conference on Residual Stresses, Society For Experimental Mechanics, Baltimore, Maryland, USA, pp.992-1001.

1994

Full Paper Abstract

Thin Plate Bending Problem of Partially Bonded Bi material Strips, Archive of Applied Mechanics, Springer Verlag, Vol. 64, pp.423-434, GERMANY.

1994

Full Paper Abstract

Fracture Mechanics

Precast Concrete Structures

Prestressed Concrete Structures

Reinforced Concrete Structures

Structural Engineering

Value Engineering